Featured products

Vibroflot Compaction is a deep compaction technique for densifying granular soils with less than 10 –15% silt present. This method is popular for improving reclaimed land. Under the influence of simultaneous vibration and saturation, loose sand and or gravel particles are repacked into a denser state and lateral confining pressure within the soil mass is increased.The Vibroflot is normally suspended from a standard crawler crane or a piling rig.

KR125ES Low Headroom Hydraulic Piling Rig

USA powerful Cummins engine GB certification and EU EN 16228 standard certification New and upgraded TYSIM Caterpillar chassis The multi-stage vibration reduction design of the power head results in better vibration reduction Strong rotary braking performance New generation electronic control platform

KR50 Drilling Rig Attachment

Mainly used for ground improvement works and anchor drilling, the line includes a remarkable variety of models that, depending on the excavator size, can reach up to 15 tonnes pull-up force. The drilling attachments of the line can be equipped with a wide range of rotary heads drilling systems. All set-up and drilling movements can be controlled by the operator directly from the excavator cabin, remote control, with great advantages in terms of efficiency, productivity and safety.

Casing Oscillator

Work stably-combined action of counterweight frame and ground anchor fix the bottom of oscillator to the ground firmly and reduce the reaction torque generated by oscillator to rig.

Pile Driving Equipment Frequency Variable Sheet Pile Driver Electric Vibro Hammer

Product Application 1. It is a hammer with higher effective, widely applied to the work including piling with concrete, piling with broken stones, piling with lime, piling with sand bags, plastic sheet water discharging piling. 2. Assembled with our hydraulic clamp, it can extract steel piles and concrete piles, it is applicable for most regions in our own country. It is a good equipment for the foundations in building, road, highways, railways, airport, bridges, harbors and docks.

Vibro Hammer

This series of vibratory hammer has specially designed electric motor, which could greatly reduce fault operation of the machine and extend the life span of the equipment. 1.Easy operated and Easy maintained. 2.Versatile.Could be applied to gravel pile,sand pile.sheet pile and so on. 3.An ideal piling equipment for bridge, port,railway,road's construction work.

KR220C Hydraulic Rotary Drilling Rig With CAT Chassis

Short Description:

USA powerful Cummins engine GB certification and EU EN 16228 standard certification New and upgraded Caterpillar chassis The multi-stage vibration reduction design of the power head results in better vibration reduction Strong rotary braking performance New generation electronic control platform

bore pile machine, borehole drilling machine, drilling equipment manufacturers, Hydraulic Rotary Drilling Rig With CAT Chassis, rotary drilling rig

Strong Rock Penetration Capacity KR220C Hydraulic Auger Pile Rig Foundation Drilling Machine With CAT Chassis

About APIE KR220C Rotary drilling rig

1. Fully electronic controlled rotary drilling machine.

2. Simple operation process.

3. GB certification and EU EN16228 standard certification.

4. Wide application range, high construction efficiency, stable performance.

5. High qualtiy, lower cost.

Performance Parameter	Unit	Value
Max. torque	kN.m	220
Max. drilling diameter	mm	1800/2000
Max. drilling depth	m	64/51
Working speed	rpm	6~28
Max. cylinder pressure	kN	210
Max. hoist capacity	kN	220
Main winch pull force	kN	230
Main winch speed	m/min	60
Auxiliary winch pull force	kN	90
Auxiliary winch speed	m/min	60
Max. cylinder stroke	mm	5000
Mast side raking	°	±5
Mast raking forward	°	5
System pressure	mpa	35
Pilot pressure	mpa	4
Max. walking speed	km/h	2.2
Max. pull force	kN	430
Operating height	mm	21082
Operating width	mm	4300
Transport height	mm	3360
Transport width	mm	3000
Transport length	mm	15300
Total weight	t	66

FAQ

1: What is the Warranty of the Rotary Drilling Rig?

The warranty period for new machine is a year or 2000 working hours, whichever comes first will be applied.
Please contact with us for detailed Warranty Regulation.

2: What can you buy from us?
Rotary Drilling Rig,Hydraulic Pile Breaker,Clamshell Telescopic Arm

3: Why should you buy from us not from other suppliers?
APIE is the only one focused on the development civil for small and medium-sized enterprise, which is specialized in the rotary drilling rig and obtains more than 40 pile driving products patent. APIE core team is instituted by the senior researchers.

Get in Touch with Us!

If you are interested in any of our products or would like to discuss a customized order,Please feel free to contact us.

APIE FOUNDATION EQUIPMENT(CHINA) LIMITED

KR220C Hydraulic Rotary Drilling Rig With CAT Chassis

Short Description:

Product Detail

Parameter table

Tell me what you need

Related Products

Pile Driving Equipment Frequency Variable Sheet Pile Driver Electric Vibro Hammer

KR125ES Low Headroom Hydraulic Piling Rig