Featured products

Spherical hobs are very mature and are widely used in many equipment, such as rotary drilling rigs, RCD, pipe jacking machines, etc. By analyzing the use of ball-tooth hobs on the above equipment, it can be known that when there is sufficient propulsion pressure and the rock layer strength is about 130MPa, the footage speed of the spherical tooth hob can be maintained at 0.3~0.5m/ h. And the footage speed is relatively stable. When the spoil discharge is sufficient, the service life of one spherical tooth hob can reach a construction length of 300m.

1. Discover our wide range of hydraulic power packs designed to perfectly match various types of hydraulic pile breakers. Whether you require a compact power pack for smaller breakers or a more robust one for larger models, we have the right solution for your needs. 2. In addition to providing versatile hydraulic power packs, we also offer detailed installation steps for both the hydraulic pile breaker and the power pack. Our step-by-step instructions ensure a smooth and hassle-free installation process, allowing you to efficiently set up your equipment and start your operations.

KR150C Hydraulic Rotary Drilling Rig With CAT Chassis

The APIE KR150C is a medium-sized rotary drilling rig designed for urban construction, bridge foundations, and high-rise buildings. Featuring a compact structure, user-friendly operation, and convenient transportation, this rig integrates modular design and strong power output to deliver high drilling efficiency. It is an ideal solution for modern foundation engineering.

Electrical vibroflot

Vibroflot Compaction is a deep compaction technique for densifying granular soils with less than 10 –15% silt present. This method is popular for improving reclaimed land. Under the influence of simultaneous vibration and saturation, loose sand and or gravel particles are repacked into a denser state and lateral confining pressure within the soil mass is increased.The Vibroflot is normally suspended from a standard crawler crane or a piling rig.

Roller Bit

The single roler bit is composed of a single cone and a lug matched by a bearing.According to different strata and construction requirements, different cutting struclures can be selected; wear resistant carbide are welded and cemented carbide inserts are inserted on the back of the lug. Rotary drilling rig drives the shaft to rotate and exert positive pressure so that the rotary dril- ing bit can impact, roll and shear the rock. Crush the rock to form a crushing ring zone.Then break the middle pillar by the swing of the shaft and take the broken pillar out to form a hole.

Hydraulic Square Pile Breaker

Hydraulic Square Pile Breaker is an efficient, modular equipment designed for cutting square concrete piles of various sizes. It delivers precise, fast, and safe pile breaking with minimal noise and vibration, making it ideal for foundation construction projects.

584-5631 DISPLAY GP-MONITOR

Short Description:

Description: Cat components ensure optimal equipment performance. Cat display assemblies provide visual cues for various Cat machine systems.

584-5631 touch screen display, cat engine parts, Cat parts, caterpillar cat part, Construction machinery parts

Product Detail

584-5631: 8″ electronic touch screen display

Description of Part Number 584-5631

Drawing Number: 584-5631 or 5845631

Product Name: GP-MONITOR DISPLAY

Weight: 1.37 kg (3.02 lbs)

Dimensions: Approximately 20 x 15 cm

Features:
• 8-inch touchscreen display module
• Pre-installed software
• Display cover included
• Aluminum housing, sealed to IP66
• Voltage range: 9-32 VDC
• 44-pin connection
• ROHS compliant
• Designed to work in conjunction with other Cat components to ensure maximum equipment performance.

Application:
For use in the operator compartment of Cat heavy-duty equipment. Consult your owner’s manual or contact your local Cat dealer for more information. Cat components are designed to operate in heavy-duty applications subject to severe vibration, shock, extreme operating temperature ranges, thermal cycling, thermal shock, moisture, corrosion, and excessive dust.

Compatible Models for Part Number 584-5631：

TRACK-TYPE TRACTOR
D11
MINI HYD EXCAVATOR
309 306
TRUCK
794 AC
EXCAVATOR
320D L 320D 313
VIBRATORY COMPACTOR
CS-34 CS68B CS56B CS78B CS74B CP-34 CP76B CP74B CP56B
WHEEL LOADER
980 XE 962 966XE 980 982XE 982 980XE 988K XE 966 972 950 972XE 966 GC

Parameter table

Specifications for Part No. 584-5631：
Width (in)	8.66
Height (in)	5.47
Depth (in)	2.33
Material	Glass Ceramic

584-5631 DISPLAY GP-MONITOR

Short Description:

Product Detail

Parameter table

Tell me what you need

Related Products

489-9456 Control GP-Electronic

184-6305 ROLLER GP-TRACK-SINGLE FLANGE

536-6580 MOTOR GP-SWING

Get in Touch with Us!

Tell me what you need