For a large-scale urban development project in the Middle East, APIE FOUNDATION EQUIPMENT was selected as the sole supplier of carbide bullet teeth. The project required precise, efficient, and low-vibration drilling in dense urban surroundings. APIE’s 19mm Carbide Bullet Teeth enabled the contractor to achieve faster cycle times and superior hole cleanliness, contributing to the project’s on-time completion while minimizing disruption to the surrounding area.

Client Profile & Challenge
The client was involved in constructing the deep foundation for a high-rise complex. The key challenges included:

  1. Tight Schedule: Fast, efficient drilling cycles were critical.

  2. Urban Constraints: Operations required precision to avoid impacting nearby structures, necessitating clean cutting with minimal vibration.

  3. Diverse Soil Profile: The site conditions ranged from compacted backfill layer to sections of bedrock, demanding a versatile tool that could handle both without compromising performance.

APIE Solution: High-Precision 19mm Carbide Bullet Teeth
APIE delivered its 19mm Carbide Bullet Teeth, a product designed for balanced performance in mixed ground conditions. The solution focused on precision and reliability:

  • Optimized Design for Clean Cutting: The bullet-shaped design and sharp, wear-resistant carbide tip allowed for clean penetration and fracturing of material, resulting in precise hole walls and efficient material removal.

  • Focused on Stability & Quality: Manufactured from cemented carbide and alloy steel, these teeth undergo a stable heat treatment process. This ensures the tooth body is both wear-resistant and tough, preventing deformation and maintaining cutting accuracy.

  • Rigorous Quality Assurance: As a professional manufacturer with ISO9001 and CE certifications, every batch of APIE teeth is tested to ensure consistent quality, dimensional accuracy, and performance.

Results & Benefits
The implementation of APIE’s bullet teeth directly addressed the project’s core demands:

  • Improved Drilling Efficiency: The enhanced cutting performance led to a 15-20% reduction in drilling time per pile compared to initial projections using older tools.

  • Enhanced Precision: The consistent performance of the teeth contributed to excellent hole verticality and wall integrity, reducing the need for rework and ensuring high-quality pile installation.

  • Reduced Vibration & Noise: The efficient cutting action produced less vibration, which was a critical benefit for the sensitive urban worksite.

  • Cost-Effective Procurement: Competitive pricing combined with reliable performance from a direct factory source provided excellent value and simplified the supply chain for the client.

Why the Client Chose APIE

  • Manufacturer Direct: As a professional manufacturer, APIE ensures quality control from raw materials to finished product.

  • Proven Global Expertise: With products exported to over 50 countries, APIE has a reputation for supporting international construction projects.

  • Comprehensive Support: APIE provides full after-sales service, including professional guidance and the availability of engineer support for onsite training if needed.

Contact APIE for Your Foundation Project

PERALATAN PONDASI APIE (CHINA) TERBATAS is a leading manufacturer of high-quality construction machinery and equipment and accessories, specializing in durable and efficient foundation drilling tools.

  • Explore Our Product Range: We offer a wide variety of gigi peluru, rock bits, and round shank chisels in multiple models (e.g., B47K22, 3050, 3055) and sizes to fit most rotary drilling rigs, including Bauer, Soilmec, and others.

  • Customization & Quality: We use premium materials like tungsten carbide dan 42CrMo alloy steel. Custom sizes and configurations are available to meet your specific project requirements.

  • Global Supply & Support: With a strong supply capacity and a commitment to customer service, we ensure timely delivery and professional technical support worldwide.

Get in Touch for a Quote or Technical Consultation:

  • Website:

    For a large-scale urban development project in the Middle East, APIE FOUNDATION EQUIPMENT was selected as the sole supplier of carbide bullet teeth. The project required precise, efficient, and low-vibration drilling in dense urban surroundings. APIE’s 19mm Carbide Bullet Teeth enabled the contractor to achieve faster cycle times and superior hole cleanliness, contributing to the project’s on-time completion while minimizing disruption to the surrounding area.

    Client Profile & Challenge
    The client was involved in constructing the deep foundation for a high-rise complex. The key challenges included:

    1. Tight Schedule: Fast, efficient drilling cycles were critical.

    2. Urban Constraints: Operations required precision to avoid impacting nearby structures, necessitating clean cutting with minimal vibration.

    3. Diverse Soil Profile: The site conditions ranged from compacted backfill layer to sections of bedrock, demanding a versatile tool that could handle both without compromising performance.

    APIE Solution: High-Precision 19mm Carbide Bullet Teeth
    APIE delivered its 19mm Carbide Bullet Teeth, a product designed for balanced performance in mixed ground conditions. The solution focused on precision and reliability:

    • Optimized Design for Clean Cutting: The bullet-shaped design and sharp, wear-resistant carbide tip allowed for clean penetration and fracturing of material, resulting in precise hole walls and efficient material removal.

    • Focused on Stability & Quality: Manufactured from cemented carbide and alloy steel, these teeth undergo a stable heat treatment process. This ensures the tooth body is both wear-resistant and tough, preventing deformation and maintaining cutting accuracy.

    • Rigorous Quality Assurance: As a professional manufacturer with ISO9001 and CE certifications, every batch of APIE teeth is tested to ensure consistent quality, dimensional accuracy, and performance.

    Results & Benefits
    The implementation of APIE’s bullet teeth directly addressed the project’s core demands:

    • Improved Drilling Efficiency: The enhanced cutting performance led to a 15-20% reduction in drilling time per pile compared to initial projections using older tools.

    • Enhanced Precision: The consistent performance of the teeth contributed to excellent hole verticality and wall integrity, reducing the need for rework and ensuring high-quality pile installation.

    • Reduced Vibration & Noise: The efficient cutting action produced less vibration, which was a critical benefit for the sensitive urban worksite.

    • Cost-Effective Procurement: Competitive pricing combined with reliable performance from a direct factory source provided excellent value and simplified the supply chain for the client.

    Why the Client Chose APIE

    • Manufacturer Direct: As a professional manufacturer, APIE ensures quality control from raw materials to finished product.

    • Proven Global Expertise: With products exported to over 50 countries, APIE has a reputation for supporting international construction projects.

    • Comprehensive Support: APIE provides full after-sales service, including professional guidance and the availability of engineer support for onsite training if needed.

    Contact APIE for Your Foundation Project

    PERALATAN PONDASI APIE (CHINA) TERBATAS is a leading manufacturer of high-quality construction machinery and equipment and accessories, specializing in durable and efficient foundation drilling tools.

    • Explore Our Product Range: We offer a wide variety of gigi peluru, rock bits, and round shank chisels in multiple models (e.g., B47K22, 3050, 3055) and sizes to fit most rotary drilling rigs, including Bauer, Soilmec, and others.

    • Customization & Quality: We use premium materials like tungsten carbide dan 42CrMo alloy steel. Custom sizes and configurations are available to meet your specific project requirements.

    • Global Supply & Support: With a strong supply capacity and a commitment to customer service, we ensure timely delivery and professional technical support worldwide.

    Get in Touch for a Quote or Technical Consultation:

    Let APIE’s bullet teeth be the reliable, high-performance solution for your next challenging drilling project.

  • Email: apie@apiepiling.com

  • WhatsApp: +86 189 2128 7030

Let APIE’s bullet teeth be the reliable, high-performance solution for your next challenging drilling project.