Tootekategooriad
Soovitatavad tooted
Meie vaibapuurraudtehnika on väga nõutud ja kauakestev puurimisvahend, mis on mõeldud pöörlevate puurtornide jaoks. See vastab kõrgetele tehnilistele parameetritele ja protsessidele, mis tagavad suurepärase jõudluse ja töökindluse. Hülsiühendust läbib hoolikas kuumtöötlusprotsess, et kontrollida deformatsiooni ja tagada täpsus. Iga mantliosa on vahetatav, mis tagab mugavuse ja mitmekülgsuse tööplatsil.
It is made of high quality steel GB-Q345B with special soil teeth which can avoid inclined hole. This tool is applicable to different layers such as clay, high-weathered layer, gravel, etc. It is a reliable and efficient drill tool for drilling deep hole and wide range of applications.
Spherical hobs are very mature and are widely used in many equipment, such as rotary drilling rigs, RCD, pipe jacking machines, etc. By analyzing the use of ball-tooth hobs on the above equipment, it can be known that when there is sufficient propulsion pressure and the rock layer strength is about 130MPa, the footage speed of the spherical tooth hob can be maintained at 0.3~0.5m/ h. And the footage speed is relatively stable. When the spoil discharge is sufficient, the service life of one spherical tooth hob can reach a construction length of 300m.
Hiljutised artiklid
HPR45 mini rotary drilling rig has a maximum drilling depth of 16 metres, with a drilling diameter range of 325 to 1000 millimetres. The machine weighs 12,000 kilograms.
APIE AHG seeria hüdrauliline haardur on toode, mis on välja töötatud ja disainitud aastakümnete pikkuse kogemuse põhjal diafragma seina ehitamise ja seadmete arendamise valdkonnas Hiinas.See aitab lahendada erinevaid probleeme, mis sarnaste seadmete ehitamisel esinevad, kohandudes keeruliste geoloogiliste tingimustega nii kodumaal kui ka rahvusvaheliselt.See aitab vähendada kliendi kasutuskulusid ja luua klientidele väärtust.
Spherical hobs are very mature and are widely used in many equipment, such as rotary drilling rigs, RCD, pipe jacking machines, etc. By analyzing the use of ball-tooth hobs on the above equipment, it can be known that when there is sufficient propulsion pressure and the rock layer strength is about 130MPa, the footage speed of the spherical tooth hob can be maintained at 0.3~0.5m/ h. And the footage speed is relatively stable. When the spoil discharge is sufficient, the service life of one spherical tooth hob can reach a construction length of 300m.
Photovoltaic drilling rig is an efficientdrilling rig developed by our companyin responseto national calls and marketdemands for the construction of solarphotovoltaic piles,which can changeconstruction modules according to differentconstruction requirements.
Pöördpuurimismasin sobib suure läbimõõduga, ülisügavaks või kiviküllastunud vaiade ja muude keeruliste geoloogiliste tingimuste puurimiseks. Seda kasutatakse laialdaselt suurte hoonete, sadama, kai, kaldapealse kaitse, silla, avamere tuuleelektrijaama ja nii edasi. See on alternatiivne toode teistele vaiade seadmetele.
The C-14 full-hydraulic multifunctional ground improvement equipment is designed for small-section tunnels and coal mine roadways. It integrates drilling, water stopping, drainage, and grouting functions. With a full-hydraulic drive system, it adapts well to complex environments and enables multi-angle operations (vertical, horizontal, inclined). Its intuitive interface allows quick parameter adjustment even in narrow spaces, enhancing efficiency and safety in underground projects. It is an ideal solution for ground reinforcement and hydrological control in mines and tunnels.
Vibroflot töötab vibratsioonilise tihendamise põhimõttel. Selle suure võimsusega vibraator tekitab kõrgsageduslikke vibratsioone, mis kantakse üle mullaosakestele. Nende vibratsioonide mõjul korraldavad lahtised mullaosakesed end ümber, vähendades tühimikke ja suurendades oluliselt mulla tihedust ja kandevõimet. Lisaks sellele aitab sisseehitatud veehooldussüsteem töö ajal pinnast lõdvendada, mis võimaldab vibraatoril tungida sügavamale pinnasekihtidesse ja optimeerida töötlustulemusi veelgi. Olenemata sellest, kas tegemist on liivase pinnase, mudase pinnase või muude veelduvate pinnaste puhul, tugevdab Vibroflot tõhusalt pinnast, takistades tõhusalt vundamendi vajumist ja tagades tugeva ja stabiilse aluse pealisehitistele.
Deep Soil Mixing (DSM) rigs use rotating shafts with cutting tools to blend soil with binders, creating stronger ground.
The KR125A single-load transportation fully hydraulic rotary drilling rig is a high-efficiency, safe, and convenient foundation equipment. It is designed to switch rapidly from transport state to working state, equipped with a high-performance hydraulic and intelligent control system to ensure efficient construction and real-time monitoring. Certified by GB and EU EN16228 standards, the KR125A guarantees excellent dynamic and static stability, making it suitable for a wide range of foundation engineering projects.